Dual Source Power Amplifier (60/75W) P75

Description

The P75 is a 2-channel dual source power amplifier with autosource switching. It features two audio line inputs with a loop out to another zone, receiver, or device from Line 2 source. This amplifier can be used for power upgrades in specific zones, for speaker selector or volume control systems.
The P75 is a Class A/B amplifier rated at 75 watts per channel into 4 ohms, and 60 watts into 8 ohms. With the Stereo/Bridge Mono switch in Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In Bridge mode the X75 is rated at 160 watts of power into a single 8 ohm load.
Not available to countries requiring CE certification. 110V only.

Standard Features:

• Built for multi-speaker applications with volume controls
• Automatic switching between two sources with signal sensing
• Front panel volume and balance controls
• Channels are bridgeable to create one channel with 160 watts of power

Details and Specifications

• Shipping Dimensions: 10.5" (W) x 4.5" (H) x 20.0" (D) / (26.7 x 11.4 x 50.8 cm)
• Shipping Weight: 11.5 lbs (5.2 kg)
• Crosstalk: > 70dB @ 1 kHz
• Frequency Response: 10Hz to 30kHz +0.0dB/- 3.0dB @ 8 ohms, 1 W
• Input Sensitivity: 900mV for 50W at 8 ohms
• Power Output: 60W per channel at 8 ohms (<1.0% THD+N) @ 1kHz / 75W per channel at 4 ohms / 160W bridged mono at 8 ohms
• Power Requirement(s): 120VAC 60Hz 4.2A
• Signal to Noise Ratio: 100dB A-weighted